|
|
|
Heat Transfer Material - JSI-HT PLUS |
| JSI-HT PLUS |
|
This
product is suitable for transfer to
most cotton, cotton-polyester, wool,
lycra, and other basic fabrics including
many athletic meshes. Cut in mirror
image through the adhesive layer (dull
side) to the plastic backing. Weed
the excess material and lay the cut
pattern on the fabric. Cover design
area with paper or cloth release sheet.
Heat Press
Instructions:
Heat transfer
at 330-350 degrees F for 8 to 10 seconds.
When transfer is cool to your touch,
peel away the backing sheet. Transferred
image may be covered with a non-stick
sheet and be re-adheared if necessary.
These instructions are good for JSI-HT
Plus and HT-SolventPrint
*
Not recommended for detailed designs
less than 1" in size.
|
|
25%
more material and still less expensive
Compare to: ThermoFLEX
PLUS
|
| JSI-HT
PLUS Color Chart |
|
Standard Colors |
| |
|
|
|
|
 |
|
| White |
Black |
Red |
Navy
Blue |
Royal
Blue |
Grey
|
Yellow |
| |
|
|
|
|
|
|
| Sky
Blue |
Orange |
Green
|
Burgundy
|
Magenta
|
Gold
|
Silver |
|
|
| JSI-HT
Specialty Films |
| JSI-HT
Specialty Films Color Chart |
|
Standard Colors |
| |
|
|
|
| Gold
Holographic |
Silver
Holographics |
Gold
Metallic |
Silver
Metallic |
| |
|
|
|
Silver
Reflective |
White
Solvent Print |
|
|
Holographic
Finish is a finer pattern
than the Metallic Finish |
|
JSI-HT
Specialty Heat Transfer Film
Pricing |
|
Product |
19."x15
feet |
19."x45
Feet |
19."x75
feet |
| Holographics |
|
|
|
| Metallics |
|
|
|
| Reflective |
|
|
|
| Solvent
Print |
|
|
|
JSI-HT-Holographics (Gold
& Silver)
This product is suitable for transfer
to most cotton, cotton-polyester,
wool, lycra, and other basic fabrics
including many athletic meshes. Cut
in mirror image through the adhesive
layer (dull side) to the plastic backing.
Weed the excess material and lay the
cut pattern on the fabric. Cover design
area with paper or cloth release sheet.
Heat transfer
at 330-350 degrees F for 8 to 10 seconds.
When transfer is cool to your touch,
peel away the backing sheet. Transferred
image may be covered with a non-stick
sheet and be re-adheared if necessary
JSI-HT-Metallics
(Gold & Silver)
This product is suitable for transfer
to most cotton, cotton-polyester, wool,
lycra, and other basic fabrics including
many athletic meshes. Cut in mirror
image through the adhesive layer (dull
side) to the plastic backing. Weed the
excess material and lay the cut pattern
on the fabric. Cover design area with
paper or cloth release sheet. Heat
transfer at 330-350 degrees F for 8
to 10 seconds. When transfer is cool
to your touch, peel away the backing
sheet. Transferred image may be covered
with a non-stick sheet and be re-adheared
if necessary.
JSI-HT-Reflective
(Silver Only)
This product is suitable for transfer
to most cotton, cotton-polyester, wool,
lycra, and other basic fabrics including
many athletic meshes. Cut in mirror
image through the adhesive layer (dull
side) to the plastic backing. Weed the
excess material and lay the cut pattern
on the fabric. Cover design area with
paper or cloth release sheet. Heat
transfer for 2-3 seconds at medium pressure
and 300 degrees F. Peel off protective
layer. Press at the same temperture
for 6-8 seconds with a with a teflon
protection sheet.
JSI-HT-Solvent
Print (For Solvent Printers)
This product is suitable for transfer
to most cotton, cotton-polyester, wool,
lycra, and other basic fabrics including
many athletic meshes. Print the image
directly on the material and cut around
the image. Let the ink dry and transfer
with transfer tape to the garment. Cover
design area with paper or cloth release
sheet. Heat transfer
at 335 degrees F for 8 to 10 seconds.
When transfer is cool to your touch,
peel away transfer tape. |
|
|
|
|
