This
product is suitable for transfer to
most cotton, cotton-polyester, wool,
lycra, and other basic fabrics including
many athletic meshes. Cut in mirror
image through the adhesive layer (dull
side) to the plastic backing. Weed
the excess material and lay the cut
pattern on the fabric. Cover design
area with paper or cloth release sheet.
Heat transfer at 345-350 degrees F
for 20 seconds. When transfer is cool
to your touch, peel away the backing
sheet. Transferred image may be covered
with a non-stick sheet and be re-adheared
if necessary.
* Punched/Perforated
rolls are available as special order
for an additional 5% per roll. |
